Regular Gypsum Wallboard
With tapered edge permits
smooth joint treatment; surface takes any decoration. Basic
recommendations: 1/2" board for single layer; 3/8" board for
2-layer; 1/4" board is regular gypsum wallboard used in
remodeling and for sound control in double layer applications. This board
is also available in 54" widths.
Firecode Wallboard
is manufactured with a type X
core to achieve fire resistance ratings when used in recommended
systems.
It is available in 1/2", 5/8", 3/4", and 1"
Shaftwall liner.
Moisture Resistant Board
is a wallboard especially
processed for use as a base for ceramic and other non-absorbent wall
tiles in bath and shower areas. The board has tapered edges so
joints above the area to be tiled can be treated in the usual
manner. Facing paper is colored light green.
Gypsum Sheathing
is used as an underlayment on
exterior walls. Finish materials are applied with fasteners
through sheathing into studs or furring strips.
Exterior Ceiling Board
is designed to provide, in a
gypsum ceiling panel, the extra resistance to moisture and sagging
required to meet protected outdoor conditions.
1" Shaftliner
is used as a component in the shaftwall system, in
area separation walls and in solid separation walls and in solid
gypsum partitions. The product has moisture resistant green
paper on both faces.
1/4" High Flex Wallboard
is specifically designed for radius construction
such as curved walls, archways and stairways. It can be used for
both concave and convex surfaces. 1/4" High Flex is
typically applied in double layers.
1/2" High Strength Ceiling Board
is designed to resist sagging equal to 5/8"
gypsum wallboard. Installed perpendicular to framing, span can
be up to 24" o.c. Can be decorated with spray textures and
will support insulation.
Plaster Board
is designed as the substrate for interior plaster
finish. It is available in 3/8", 1/2", and 5/8" Fire Code.
