We carry USG, Metacaulk and W.R. GRACE - Fire Stop Systems.
FlameSafe Firestop Sealants
FlameSafe Firestop Coatings
FlameSafe Firestop Putties
FlameSafe Firestop Mortar
USG Firecode Compound
FlameSafe Firestop Bags/KBS Sealbags
FlameSafe Firestop Devices/Sleeves/Wrap Strips
Metacaulk 1000 Intumescent Firestop Sealant
Metacaulk 950 Water Based Sealant
Metacaulk Pipe Collar
Metacaulk Wrap Strip
Metacaulk 835+
General Purpose Silicone
Metacaulk Firestop Pillows
Metacaulk 1100 Intumescent Firestop Mastic
Metacaulk 1200 Spray Applied Mastic
Metacaulk Fire Rated Putty
Metacaulk Box Guard
Metacaulk Fire Rated Mortar
FlameSafe Firestop Sealants: goto top
 | Intumescent/Elastomeric Sealants - Dynamic Movement Approved |
| Endothermic Sealants |
| UL and ULC Approved / Factory Mutual Certified / Intertek (Warnock Hersey) Listed |
| 1, 2 and 3 Hour Rated Systems |
| Various Construction Applications |
FlameSafe Firestop Coatings: goto top
| Intumescent/Elastomeric Coating |
| Dynamic Movement Approved |
| UL and ULC Approved |
| 1, 2 and 3 Hour Rated Systems |
| Construction Joints, Top of Wall, and Metallic Pipe Applications |
FlameSafe Firestop Putties: goto top
| Non Hardening Intumescent Putty and Putty Pads |
| Easy Installation - No tools Required |
| UL and ULC Approved / Factory Mutual |
| 2 and 3 Hour Rated Systems |
| Power and Data Communication Cables and Electrical Box Applications |
FlameSafe Firestop Mortar: goto top
| Light-Weight / Low-Density Mortar |
| UL and ULC Approved / Factory Mutual Certified |
| 2 and 3 Hour Rated Systems |
| Large Openings With Multiple Penetrations |
USG Firecode Compound: goto top
| Light-Weight / Low Density |
| UL Classified for 2 and 3 Hour Ratings |
| Low-Cost, Less Waste, Durable With Easy Cleanup |
FlameSafe Firestop Bags/KBS Sealbags: goto top
| Durable Firestop Bags Allow for Re-Entry |
| Easy-To-Install Without Sealants or Putties |
| UL and ULC Approved / Factory Mutual Certified |
| 1, 2, 3 and 4 Hour Rated Systems |
| Cable, Cable Tray and Metallic / Non Metallic Pipe Applications, Blank Openings |
FlameSafe Firestop Devices/Sleeves/Wrap Strips: top
| Intumescent |
| Easy-To-Install |
| UL and ULC Approved |
| 1, 2 and 3 Hour Rated Systems |
| Non Metallic Pipe / Conduit and Insulated Pipe Applications |
Metacaulk 1000 Intumescent Firestop Sealant: goto top
| UL Classified up to 4 hours |
| Meets ASTM E 814, UL 1479 and UL 2079 Standards |
| Remains Flexible |
| Non-sagging, Non-toxic, no VOC's |
| Economical |
| For exterior and interior use |
| Paintable |
| Available in cartridges and pails |
Metacaulk 950 Water Based Sealant goto top
| Economical |
| Water based |
| VOC compliant |
| Non-sagging formula |
| Intumescent |
| Forms a hard char |
| Paintable |
| Non-flammable |
| 1, 2 and 3 hour rating |
Metacaulk Pipe Collar goto top
| 25% reduction of installation time |
| Simple locking mechanism for easy installation |
| Economical - Most systems do not require backfill |
| No measurement of material required |
| Fits in limited access areas |
| Easy to apply - simply wrap required number of strips around penetrating item and push into annular space. |
| Easy dispensing carton |
| Economical 1" width |
| No cure time |
Metacaulk 835+ General Purpose Silicone goto top
| Elastomeric |
| Non-sag |
| Low odor |
| Exterior / interior use |
| May be used where dynamic movement is expected |
Metacaulk Firestop Pillows goto top
| UL Classified up to 3 hours |
| Easy to install |
| Cost effective - Reusable |
| Forms a very strong char when burned |
| No wire mesh required in certain installations |
| Two sizes |
Metacaulk 1100 Intumescent Firestop Mastic goto top
| UL Classified up to 2 hours |
| Meets ASTM E 814 and UL 2079 Standards |
| Remains Flexible |
| Can be applied by spray, trowel or brush |
| Non-sagging, non-toxic |
| Economical |
| Paintable |
| Available in pails and drums |
Metacaulk 1200 Spray Applied Mastic goto top
| UL Classified systems up to 2 hours |
| Meets UL 2079 standards and cycling requirements of ASTM E 1399 (500 cycles) |
| Remains flexible |
| Can be applied by spray, trowel or brush |
| Economical |
| VOC compliant |
Metacaulk Fire Rated Putty goto top
| Metacaulk Putty Sticks are used to seal around penetrating items through fire rated walls, floors and within blank openings. |
| Metacaulk Putty Pads are used to maintain the hourly rating of fire rated walls containing electrical outlet boxes and to reduce sound transmission. |
| Easy to install |
| Cost effective |
| Highly intumescent |
| Fits on the inside of the electrical box |
| Non-conductive |
| Dielectric breakdown voltage 22v/mil (ASTM D 149) |
| Self adhesive strip |
Metacaulk Fire Rated Mortar goto top
| Tested in accordance with ASTM E 814 and UL 1479 for up to 4 hour construction with only 4 1/2" thickness. |
| Easy to use...mix into water, then pour, trowel or pump in place. |
| Cost savings in labor and material when compared with products such as composite sheets. |
| High yield per pound of Metacaulk Mortar makes this a truly cost effective approach to firestopping medium to large openings. |